Ghost Immobiliser Installation
Guard your precious possessions from thieves by adding an immobiliser ghost. Our TASSA-certified system guards against hacking, key cloning, and bypassing the vehicle immobiliser.
The system is hidden within the wiring loom in your vehicle and is invisible to anyone who looks. It is operated by generating pin code push sequences through buttons already present on the steering wheel, door cards, and the centre console.
No circuit cuts
A car is a precious asset that you put in years of hard work to acquire, so it's understandable why car owners would want to secure their car from theft. However, traditional security systems like alarms and wheel locks can easily be cut off or jumped by thieves. A ghost immobiliser is a highly-effective solution that operates silently and can't be identified by modern thieves.
A ghost immobiliser is also known as a hidden device is a device that connects with your vehicle's data network CAN to disable the engine. It does this without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash, and door panels, to create an unique pin code that only you know. The code can be altered at any time and can contain up to 20 digits depending on your preferences. It also comes with a secure emergency code you can use in case you forget your PIN.
The ghost immobiliser can also be beneficial to stop the relay box at your home from transferring the signal from your car key, which could open the doors and begin your vehicle. It also blocks advanced methods of stealing your vehicle, including OBD port hacking. The device is small, weatherproof and difficult to see. It's also difficult to hack.
The ghost immobiliser also has an advantage: it is able to be fitted to your vehicle without leaving permanent marks. This makes it perfect for those who are planning to sell their car in the future. It's also much faster and easier to install than a factory-fitted system.
The Autowatch Ghost is a groundbreaking next-generation device that blocks vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN. It is a devious device that can be set up without severing any wires and requires no additional key fobs. It can also be connected to the vehicle's original ECU to prevent thieves from bypassing it by using an additional key or replacing the ECU with the use of a "relay". This system has been verified by TASSA and is able to be linked to an International Security Register. Owners can rest assured, knowing that their vehicles are protected from theft.
No scanning by RF
If you have invested an enormous amount of time and money into the customisation of your vehicle, you'll need to secure it from theft. Installing an immobiliser is one of the best ways to stop theft. It will prevent your vehicle from starting until you input the unique code. Utilizing the buttons on your steering wheel as well as the dashboard, you can create an apex of 20 digits long which is only accessible to you, ensuring that only you have access to your vehicle. You can also create a valet and service mode that will allow you temporarily to start your car without having to enter the PIN code. This will allow your technician to work on your car without you being there. This is an excellent option for those who want to reduce time and make their lives simpler.
A ghost immobiliser, a new generation device connects to the CAN data network of your vehicle and utilizes buttons on the dashboard and steering wheel to set a PIN number. It is designed to be stealthy without any LED indicator or noise to give it away and can be placed anywhere on the vehicle without impacting the look of your prized possession.
This stealthy device is TASSA approved and could reduce your insurance costs. It also has an ability to track your vehicle that allows you to locate your vehicle even if it has been stolen. This is particularly useful if have a costly or rare vehicle that you have invested lots of time making it your own.
The Autowatch Ghost can be used together with an iPhone app to enable you to remotely start your vehicle if you forgot your PIN or unable to get into the vehicle for some reason. This feature is ideal for when you have to take your kids to school or run errands, but don't want to put yourself at risk by letting the safety of someone else driving your car. It is also helpful in the event that you need to bring your vehicle in for servicing or repair.
Another advantage of the Ghost is that it doesn't transmit or detect radio frequency signals, which makes it unnoticeable to thieves who employ RF scanning or code technology to capture codes. It can also protect your car from key copying, ECU swapping and other usual methods of car theft.
No key cloning
Ghost immobilisers can be a great way to protect top-end vehicles and stop key cloning. They stop your vehicle from starting without a PIN code being entered along with the regular key fob. This makes it very difficult for thieves to steal the vehicle, and may even discourage them from trying. This is a good idea if your vehicle has been extensively modified or is a rare model.
These immobilisers connect to the vehicle's onboard CAN network and are completely hidden meaning there is no visible indication of its presence within the vehicle. It is also impossible for thieves to detect the device by using radio frequency scanning or code grabbing technology. This means that a burglar will need to invest a lot more time in order to successfully take your car.
To bypass the system, thieves must be aware of the pin code and the location of the Ghost. However, the pin code is unique to you and may be changed as many times as you want. The pin code you choose is easy to remember but mathematically difficult for anyone else to decipher. The engineer will also provide an emergency pin number in the event that you forget the pin.
The Ghost CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It can be used with any vehicle and can be completely customized to match your vehicle's appearance. It is also very cost-effective and simple to use. The device can be transferred to another vehicle, as long as it is compatible with the new vehicle.
The CAN bus can be used with other security features. For example, it can detect damage to your vehicle and warn the owner. It can also stop the engine if the vehicle is damaged. The system also protects your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. It can also notify the owner when the vehicle is moving.
No OBD port hacking
Ghost is a hidden immobiliser module connected to your vehicle's CAN data network that prevents thieves from hacking into your car to disable the alarm, or deactivate the key fob and generate new keys. This technology is a significant improvement over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that the system won't be affected by disconnecting or replacing your battery.
The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key-fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves are able to employ diagnostics to find circuit breakages in your vehicle. They can bypass immobilisers that require a lot wiring or are integrated into the wiring. The Ghost is weatherproof, does not require additional wiring and isn't detected by diagnostic tools of a professional. It can be used on vehicles with anti-theft devices.
Another benefit of a Ghost immobiliser is that your vehicle is only able to be started by a person who has access to the PIN number and has physical access to your car. ghost immobiliser for sale is a significant advantage over security systems that can be tampered with using simple cable alteration, a screwdriver or the utilisation of a universal remote controller.
You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on mobile phones or computers. This is useful if you need to start your car after having left it in a garage or using a valet parking service.
The Autowatch Ghost 2 is the latest version of the product, and is affixed to insurance by TASSA when installed by one of our authorized installers. It features the QR fingerprint system to identify parts that are not in use, which allows for the return of stolen items if they are discovered. It can also be set to'service mode', which allows the engine to be started when your vehicle is in a garage, or with valet parking, but you will need to enter your PIN code once more to exit the car.